2. using a sensor closed loop PID control, advanced electronic thermostat line, stepless adjustment of air volume, rapid heating, safe desoldering QFP, PLCC, SOP, BGA and other temperature-sensitive components.
3. set intelligent cooling system, after the shutdown delay completion of the work of air, air temperature lower than 50 ℃ after the automatic shutdown, better prolong heater life and to protect the hot air gun!
4. anti-static high temperature resistant silicone tube connecting the handle to the console, suitable for different non-member desoldering SMD, quick start up quickly, with the open with the use!
5. imported spiral heating element and advanced processing technology, assembled into a high-power heating element, long life
3. using the new independent pump, low noise, low vibration, long life, durable.
Note: The bottom of the fuselage must be removed before using the middle of the three screws, the screws in order to transport them with a fixed pump.
Applications:
1. various types of electronics industry and factories desoldering operations.
2. thermal plastic welding industry jobs.
3. home appliances and electronics repair and maintenance work.
4. all kinds of PVC / PE / PP / PVDF plastic materials such as board, pipe, film sheet spot welding.
5. each electron Universities teaching and practice of operational applications.
Specifications
Model
TAIKD-850A
Voltage
AC 220V/50Hz
power
270W
Temperature range
100-500°C Stepless
Pump form
Brushless fan gentle wind
Gas flow
0.3～24L/min Stepless
Pump power
45W
Heater
Imported four-wire 250W heater
Noise
<40dB
Overall size
(L)300×(W)265×(H)175mm
weight
3.05kg
Prev:
Next:TAIKD-850A
400-688-3128